Amada HKA400
Band Saw

The Amada HKA400 Band Saw is a Horizontal Automatic Metal Cutting Miter Band Saw.

Miter Cutting Band Saw specifically designed for cutting structural steel sections.

  • 3 H.P.
  • 1 1/4” Blade
  • Metal Cutting

Saw Head Frame

  • The rigid ‘C’ section frame carries the mountings for the two band wheels, heavy-duty worm drive gear reducer, the band drive motor, and saw guide arm mounting supports.

Band Wheels & Drive System

  • The inverter-controlled band drive motor is directly coupled to the worm gear reducer eliminating friction losses of a variable speed pulley drive. The drive wheel transmission is designed and manufactured by Amada to provide a high-efficiency speed reduction, which requires no external cooling to deliver more power to the drive wheel. Band speed is set using the band speed adjustment knob on the control panel.

Canted Head and Single Column Mounting

  • The head is canted 8° to enable the machine to cut rolled sections e.g. I beams or rectangular tubing at significantly faster rates because the blade is never in full contact with the horizontal section of the material. The single-column mounting enables the saw guides to be much closer together compared to scissor-type machines which improve the cutting performance.

Full Stroke Clamping Vise

  • The full stroke clamping vise reduces the operator’s setup time for different widths of material.

Manual Vise Inching Control

  • The vise inching control enables the operator to more accurately locate the workpiece for the cut because he can inch the vise until it is just touching the material but not clamped hard. Then with the help of the shadow line projector, make any small adjustment to the position to produce the desired cut.

Guarding

  • The saw band is constrained within the heavy gage guarding in all non-cutting areas.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Amada HKA400 Band Saw.

Categories: ,

Amada HKA400
Band Saw

FEATURES+
  • 8 Degrees Saw Head Cant
  • 60 Degree Miter Capability
  • Auto Index, Only at 0?
  • Direct Drive
  • Full Stroke Vise
  • Inverter Blade Speed Control
  • Light Beam Marking
  • Post Construction Type Saw Head
SPECS+
Cutting Capacity – Round (diameter) 12.6″ (at 90?) 320 mm (at 90?)

8.9″ (at 45?) 200 mm (at 45?)

3.9″ (at 60?) 100 mm (at 45?)

Cutting Capcity – Rectangle (W x H) 16″ x 11″ (at 90?) 400 x 280 mm (at 90?)

8.9″ x 11″ (at 45?) 200 x 280 mm (at 45?)

3.9″ x 11″ (at 60?) 100 x 280 mm (at 60?)

Work Load Capacity 880 lbs (400 kg)
Blade Dimensions 12’9″ x 0.042″ x 1-1/4 (3885 x 1.066 x 32 mm)
Blade Speed 100-325 ft./min, Inverter (30-100 m/min, Inverter)
Tension Control Manual – Split Clutch
Vise Operation Type Front and Main Vise
Blade Saw Motor 3 HP (2.2 kW)
Hydraulic Pump Motor 1 HP (0.75 kW)
Cutting Fluid Pump Motor 1/10 HP (0.06 kW)
Power Supply Voltage AC220V?10%, 3 PH, 60 Hz All other Voltages Require Transformer
Power Requirement 10.7 kVA
Cutting Fluid Tank Capcity 10.7 gal (40 Liters)
Cutting Fluid Pump Type Electric
Hydraulic Tank Capcity 10.7 gal (40 Liters)
Chip Disposal Manual
Material Index Mechanism Shuttle Vise
Stroke 15.7″ (400 mm)
Machine Dimensions – Head Up Position 84.3″ x 92.3″ x 73.4″ (2140 x 2345 x 1865 mm)
Machine Dimensions – Head Down Position 84.3″ x 92.3″ x 64.0″” (2140 x 2345 x 1625.5 mm)
Table Height (Above Floor) 30.3″ (770 mm)
Machine Weight 3,528 lbs (1,600 kg)
MEDIA+

Please call for more information about Amada band Saw Model HKA400 1 (800) 286-3624

OPTIONS+

AXCELA G SERIES Band Saw Blades

High-performance Carbide Tipped Band Saw Blades
High-quality carbide tips and the dove tail tooth shape. AXCELA makes incredible cutting speed for hard to cut material.

BCTBR Band Saw Blade

Multi Faceted Carbide Tipped Blade

Designed exclusively for heat-resistant alloys, nickel-based alloys, titanium alloys, and special cast tensile steels, all with high tensile strength of over 142,000 psi. It features ultra-hard, diamond sharp carbide tipped teeth that resist low thermal conductivity and abrasion that can quickly break down conventional bi-metal type bands.

MAGNUM HI-LO Band Saw Blade

Patented Varying Tooth Height and Set M-71 Bi-metal Blade
High-quality carbide tips and the dove tail tooth shape. AXCELA makes incredible cutting speed for hard to cut material.

Hi-Lo Band Saw Blade

Varying Tooth Height Design, M-42 Welded Edge

The Hi-Lo blade features a high and low teeth height design and a 15-degree rake angle. The blade is ideal for cutting hard steels.

CHIP BREAKER Band Saw Blade

Patented Gullet Design
Designed to reduced heat generated at increased chip load. With reduced tooth stripping and breaking this equates to the lowest possible cost per square inch of metal cutting.

SGLB Band Saw Blade

M-42 Bi-metal Blade

The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade’s tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.

COBALT8 Band Saw Blade

Amada Modified M42 High-Speed Steel Bi-Metal Blade
General-purpose blade ideal for cutting mild steel and structural steel. “Chip Curler” tooth shape and unique set pattern result in longer blade life.

SMARTCUT BAND Band Saw Blade

Thinner Blade of SGLB and Magnum Hi-Lo

Thinner more than 10% from regular SGLB or Magnum Hi-Lo. Specialized Blade for PCSAW330

PROTECTOR EX M42 Band Saw Blade

Exclusive use for structural steel with M-42 Edge. Which has both strength against tooth chipping and high wear resistance. PROTECTOR EX added to the back face of the tooth tip prevents excessive cutting.

PROTECTOR Band Saw Blade

Exclusive Use for Structual Steel with M-30 Matrix Bi-metal Blade

Exclusive use for structural steel. Protector provides long blade life and prevents tooth breakage, eliminating excessive tooth stripping. It can withstand the shock of interrupted cuts, allowing for heavier penetration for faster cutting rates. Protector uses a broaching style set pattern designed to eliminate pinching, which prevents the blade from binding the cut.

MGLB Band Saw Blade

General Purpose Matrix Bi-metal Blade

The MGLB is best suited for cutting structural shapes, tubing and stacks of mild steel pieces. The MGLB allows band saw machines to cut a wide range of material sizes and shapes without requiring a change of blades. Its tough high-speed steel teeth resist chipping, stripping and abrasion. It can also tolerate the occasional improper speeds and feeds that are often used by inexperienced saw operators.

Description

The Amada HKA400 Band Saw is a Horizontal Automatic Metal Cutting Miter Band Saw.

Miter Cutting Band Saw specifically designed for cutting structural steel sections.

  • 3 H.P.
  • 1 1/4” Blade
  • Metal Cutting

Saw Head Frame

  • The rigid ‘C’ section frame carries the mountings for the two band wheels, heavy-duty worm drive gear reducer, the band drive motor, and saw guide arm mounting supports.

Band Wheels & Drive System

  • The inverter-controlled band drive motor is directly coupled to the worm gear reducer eliminating friction losses of a variable speed pulley drive. The drive wheel transmission is designed and manufactured by Amada to provide a high-efficiency speed reduction, which requires no external cooling to deliver more power to the drive wheel. Band speed is set using the band speed adjustment knob on the control panel.

Canted Head and Single Column Mounting

  • The head is canted 8° to enable the machine to cut rolled sections e.g. I beams or rectangular tubing at significantly faster rates because the blade is never in full contact with the horizontal section of the material. The single-column mounting enables the saw guides to be much closer together compared to scissor-type machines which improve the cutting performance.

Full Stroke Clamping Vise

  • The full stroke clamping vise reduces the operator’s setup time for different widths of material.

Manual Vise Inching Control

  • The vise inching control enables the operator to more accurately locate the workpiece for the cut because he can inch the vise until it is just touching the material but not clamped hard. Then with the help of the shadow line projector, make any small adjustment to the position to produce the desired cut.

Guarding

  • The saw band is constrained within the heavy gage guarding in all non-cutting areas.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Amada HKA400 Band Saw.

© Copyright 2024, Ocean Machinery Inc.